 |
|
 | | FoamBoard Cutters
CFS offers a variety of FoamBoard cutting devices - from lower-cost hand/ruler cutters to higher-end wall-mount cutters.
|
|
|
 | | 12" x 18" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 | | 24" x 36" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 | | 32" x 40" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 | | 40" x 60" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 | | Designer Edge Black 3/16" FoamCore Boards/Pouch Boards
Solid black foamcore with white, smooth mounting surfaces. 5 boards per box in several sizes.
|
|
|
 | | Plastic Corner Protectors for 3/16" foamcore (250 pcs.)
- easily slips onto each of the corners of your 3/16" thick foamcore presentations to prevent unsightly damage or corner smashes. NOTE: fits 3/16" thick only.
|
|
|
 | | Twist-N-Hook Board Hangers (100 pcs.)
 Just twist & screw these plastic hangers into 3/16" or 1/4" thick foamcore or gator board sheets without needing to punch into the image area. The hanger portion features a hole for hooks, wire or string with 2 flat sides and can safely hold board sizes up to 24 x 48 inches. 100 pieces per bag.
Dimensions: Head 1/2" H x 3/8" W x 5/16" D, Hole 1/8" W x 1/4", Overall 1-7/16" High
|
|
|
 | | Pic-N-Hook Hangers for Plastic Corrugated Boards (100 pcs.)
 The new Pic-N-Hook media hangers are used to hang standard Corrugated Plastic material. Simply push it into the edge of the material so that it penetrates across the corrugated ridges and the eyelet hole allows your board to be hung using string, wire or nails without punching a hole through the image area. Can also be used with 1/2" corrugated plastic, but does require punching a small hole so that the hanger can grasp the ridges. 100 pieces per bag.
Dimensions: Head 11/16" H x 7/16" W x 1/8" Thick, Hole 7/32" Diameter, Overall 1-1/2" High
|
|
|
 | | Super 77 Spray Mount - Permanent (24 oz.)
|
|
|
 | | Spray Mount 6065 - Temporary (16.5 oz.)
|
