 |
|
 Lamination Zippy Knife (Safe Lamination Trimmer)Use this Zippy Knife to cut roll laminate as it comes off of your roll laminator. Don't ever worry about slicing your roller with an xacto-blade again! Completely safe and hidden blade. (1 each)
|
|
|
 Rubber Roll Cleaner - For Thermal Roll LaminatorsUsed to remove excess adhesive on the roller for thermal roll laminators. Works like a dream! Doesn't require chemicals! (1 each)
|
|
|
 Rubber Roller Cleaner, 1 pint- a non-abrasive cleaning solution, perfect for removing glue buildup deposits, ink, stains & also helps in deglazing rollers. Works with most rubber rollers as well as metal rollers.
|
|
|
 Plastic Corner Protectors for 3/16" foamcore (250 pcs.)- easily slips onto each of the corners of your 3/16" thick foamcore presentations to prevent unsightly damage or corner smashes. NOTE: fits 3/16" thick only.
|
|
|
 Twist-N-Hook Board Hangers (100 pcs.) Just twist & screw these plastic hangers into 3/16" or 1/4" thick foamcore or gator board sheets without needing to punch into the image area. The hanger portion features a hole for hooks, wire or string with 2 flat sides and can safely hold board sizes up to 24 x 48 inches. 100 pieces per bag.
Dimensions: Head 1/2" H x 3/8" W x 5/16" D, Hole 1/8" W x 1/4", Overall 1-7/16" High
|
|
|
 Pic-N-Hook Hangers for Plastic Corrugated Boards (100 pcs.) The new Pic-N-Hook media hangers are used to hang standard Corrugated Plastic material. Simply push it into the edge of the material so that it penetrates across the corrugated ridges and the eyelet hole allows your board to be hung using string, wire or nails without punching a hole through the image area. Can also be used with 1/2" corrugated plastic, but does require punching a small hole so that the hanger can grasp the ridges. 100 pieces per bag.
Dimensions: Head 11/16" H x 7/16" W x 1/8" Thick, Hole 7/32" Diameter, Overall 1-1/2" High
|
|
|
 Print Cleaning Roller (PCR) & Adhesive Pad- use this to clean prints before they are laminated. Dust and debris is removed with the roller, then transferred to the adhesive pad. Extremely simple to use and very efficient - roller width is 12". (1 roller & 1 pad of 50 adhesive sheets)
|
|
|
 Adhesive Pad Replacement for Print Cleaning Roller- replenishes the adhesive pads for use with the PCR print cleaner above. (50 sheets/pad)
|
|
|
 Lamination Roll Storage Carousel (7 Rolls)The Lamination Roll Storage Carousel is available in either 3" or 2" core sizes (2" core will also work with 1-1/4" core). Holds seven rolls of film and rotates freely. Maximum weight capacity: 275 lbs.
|
|
|
 Roll Storage Caddy Holds up to 12 Rolls (3" core)The RC-12 Roll Storage Caddy will hold up to 12 rolls of lamination film with a 3" core. Features: Heavy-Duty 2" square tubing, Powder-coated (Silver Vein) finish, and Heavy-duty 2" Nylon casters. Will hold 1000lbs of film!
|
|
|
 Roll Storage Caddy Holds up to 16 Rolls (3" core) 16-roll version of the RC-12 - Maximum weight capacity: 1000 lbs.
|
