 |
|
 FoamBoard CuttersCFS offers a variety of FoamBoard cutting devices - from lower-cost hand/ruler cutters to higher-end wall-mount cutters.
|
|
|
 12" x 18" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 24" x 36" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 32" x 40" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 40" x 60" Precoated 3/16" FoamCore (25 sheets)
|
|
|
 Designer Edge Black 3/16" FoamCore Boards/Pouch BoardsSolid black foamcore with white, smooth mounting surfaces. 5 boards per box in several sizes.
|
|
|
 Plastic Corner Protectors for 3/16" foamcore (250 pcs.)- easily slips onto each of the corners of your 3/16" thick foamcore presentations to prevent unsightly damage or corner smashes. NOTE: fits 3/16" thick only.
|
|
|
 Twist-N-Hook Board Hangers (100 pcs.) Just twist & screw these plastic hangers into 3/16" or 1/4" thick foamcore or gator board sheets without needing to punch into the image area. The hanger portion features a hole for hooks, wire or string with 2 flat sides and can safely hold board sizes up to 24 x 48 inches. 100 pieces per bag.
Dimensions: Head 1/2" H x 3/8" W x 5/16" D, Hole 1/8" W x 1/4", Overall 1-7/16" High
|
|
|
 Pic-N-Hook Hangers for Plastic Corrugated Boards (100 pcs.) The new Pic-N-Hook media hangers are used to hang standard Corrugated Plastic material. Simply push it into the edge of the material so that it penetrates across the corrugated ridges and the eyelet hole allows your board to be hung using string, wire or nails without punching a hole through the image area. Can also be used with 1/2" corrugated plastic, but does require punching a small hole so that the hanger can grasp the ridges. 100 pieces per bag.
Dimensions: Head 11/16" H x 7/16" W x 1/8" Thick, Hole 7/32" Diameter, Overall 1-1/2" High
|
|
|
 Banner Hangers
 |
hanging banners/foamboard
 |
 |
New generation PowerTabs® are made of high strength composite film, which is thinner than but just as strong as original BannerUps®. Their corner-friendly shape and thin profile help them blend inconspicuously into the banner surface.
Just run some rope, cord, twine or high-test fishing line through PowerTab® end loop tabs for light duty/indoor applications - or - for the ultimate reinforcement: through the pre-punched center hole for hanging banners outdoors.
These also work for Coroplast®, Foamcore boards, and paper.
|
