Keencut’s Sabre Series 2 is an out of the box ready to use solution for medium-volume cutting. It’s perfect for the print shop, workshop, studio, architects’ practice, or educational institutions. The Sabre combines Keencut safety with versatile general-purpose cutting; it does not need to be fixed to a dedicated bench, and there is no set-up.
The versatile cutter designed for safety and accuracy
Keencut’s Sabre Series 2 is an out of the box ready to use solution for medium-volume cutting. It’s perfect for the print shop, workshop, studio, architects’ practice, or educational institutions. The Sabre combines Keencut safety with versatile general-purpose cutting; it does not need to be fixed to a dedicated bench, and there is no set-up.
The Sabre provides a straight square cut of materials from 13mm (1/2″) thick foamboard to delicate tissue paper. Floating, self-adjusting hinges automatically adapt for stable lay-flat cutting and offer the opportunity to cut wider sheet materials.
Space-saving and fully mobile, the Sabre can be mounted on an optional stand and fitted with a waste catcher and roll feed. The safety features make it ideally suited for use by inexperienced operators in any environment.
Key Features
The Sabre Series 2 comes with three blades:
Graphik blade holder: designed for the sign maker and digital printer with a specially crafted knife edge for extra stability in tougher materials and a cutting depth of up to 13mm (1/2″). By running the blade backwards, acrylics can be scored for snapping. The reversible blades have the ability to be set to cut left-right or right-left.
Rotary blade holder: cold cuts textiles and other delicate materials and is ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive. It is fitted with a red safety blade guard to be engaged when not in use. A cutting mat is required to be used when using the rotary blade holder, please note this is not supplied.
Medium duty blade holder: uses standard off-the-shelf medium duty utility blades for general purpose, economical cutting and can be adjusted to cut materials up to a depth of 10mm (3/8″).
Types of materials the Sabre Series 2 can cut:
Semi-rigid materials
PVC foamboard ≤ 13mm (1/2″)
Corrugated / fluted plastic e.g Correx ≤ 13mm (1/2″)
Corrugated cardboard ≤ 13mm (1/2″)
Foam centred board ≤ 13mm (1/2″)
Rigid materials (scoring only)
Cast acrylic / Plexiglas ≤ 3mm (3/32″)
Flexible materials
Banners
Magnetic sheet
Film
Self-adhesive vinyl
Textiles and delicate materials