Search results for: 'stdubl'

Stable and balanced, makes most wider signage install projects easy and quick.

Learn More

Stable and balanced, makes most wider signage install projects easy and quick.

Learn More

The PF-P3300 paper folder brings quick, accurate, and stable folding production with user-friendly operation.

Learn More

Steel foot to hold 1/4" thick boards standing vertically - overall 6" wide x 1.5" deep x 1.5" high with 1/4" mounting channel in the center.

Learn More

Set the adjustable thickness with a twist of the handle and stab into a stack of sheets to count out the same number of sheets for your pads.

Learn More

• Ratchet-lock blade actuator
• High-impact ABS handle
• 90-degree flat cutting base with build-in adjustable stainless steel guide and staple remover
• Stainless steel blade channel
• No tool blade change
• Preloaded with 18mm LB heavy-duty silver snap-off blade

Learn More

Steel foot to hold 1/2" thick boards standing vertically - overall 12-5/8" wide x 2.5" deep x 2" high with 1/2" mounting channel in the center.

Learn More

These steel feet (front & back foot pair - most signs need 2 pair) to hold any thickness of board to stand vertically tall - each side foot measures 8" wide x 2.5" deep x 2.5" high.

Learn More

20 per pack

Learn More

20 per pack

Learn More

20 per pack

Learn More

10 per pack

Learn More

Electric, push button operation, 2 holes at 1/4" diameter, up to 12 sheets at a time.

Learn More

10 per pack

Learn More

5 per pack

Learn More

4 per pack

Learn More

Heavy-duty, adjustable position 3-hole manual punch, 40-sheet capacity, 9/32" diameter holes.

Learn More

Ideal for use in hospital administrative offices, nurse's stations, doctor offices and other medical related areas. Features 5 adjustable punching heads for 3 or 5 hole punching.

Learn More

The Rapid 49 is a manual high-capacity stapler that can staple up to 170 sheets of paper. 

Learn More

10 per pack

Learn More

High-capacity, light/medium-duty single hole punch, ideal for large stacks of 20 lb. bond paper. Punching Capacity: 300 sheets / 1-3/8" tall stack.

Learn More

Learn More

Allows the 63" Excalibur cutter to stand on the floor.

Learn More

Learn More

Learn More

Manual, 12" wide punch with disengageable die pins, adjustable side stop & margin depth settings. A built-in comb spreader opens combs up to 2".
Punch capacity: 25 sheets

Learn More

High capacity, light/medium-duty hole punch with traversing table makes for quick, multi-hole production at a low cost. Punching Capacity: 300 Sheets/1-3/8"

Learn More

Learn More

Learn More

Learn More

Affordable, low-volume card slitter provides pro results complete with bleeds in a compact, electric-powered unit - produces about 30 cards per minute on stocks up to 14 point thick in 2 cut passes.

Learn More

18" maximum width - carefully designed with self-sharpening tungsten steel blade and premium quality components, the Roll-A-Blade Trimmer is guaranteed to give an effortless and professional laminating trim, as well as many years of trouble-free service.

Learn More

Manual 4:1 punch with adjustable margin punching depth, adjustable side stop and open-ended punch throat for 14" sheets or longer. Built-in coil inserting guide hidden under table door - all metal construction. Learn More

Learn More

Learn More

Manual punch and bind machine - Ideal for low-mid volume office environment. Available in both 3:1 and 2:1 (holes per inch).

Punching Capacity: 20 Sheets

Binding Capacity:

• 3:1=120 Sheets
• 2:1=265 Sheets

Learn More

Learn More

Learn More

Learn More

Tabletop heavy-duty stapler – up to 40 sheets of 20# paper (4" margin depth capacity).

Learn More

The HANDY-PADDER has an extended metal stabilizer designed to eliminate tipping problems when loaded with stock. The 8° table slant allows gravity to do all the work of aligning stock and keeping it square. Load 11" x 17", 8-1/2" sheets of 20# bond, or even more with smaller sheets.

Learn More

Heavy-duty 3-hole punch. Ideal for high-volume 3-hole production, without having to buy a paper drill.
Punching Capacity: 300 Sheets

Learn More

36" maximum width. Carefully designed with a self-sharpening tungsten steel blade and premium quality components, the Roll-a-Blade Trimmer is guaranteed to give an effortless and professional laminating trim, as well as many years of trouble-free service.

Learn More

The Model 7020 Pro 13" heavy-duty pouch laminator includes an adjustable temperature control and 5 YEAR warranty!

Learn More

Manual 4:1 coil punch with integrated electric coil inserting roller - includes crimping pliers! A great value to speed up your booklet production. Punching Capacity: 12 Sheets Oval Die Also Available

Learn More

Learn More

Manual 4:1 coil punch with OVAL holes (4mm x 5mm) plus an integrated powered coil inserter roller - includes crimping pliers! A great value to increase your booklet making productivity.
Punching Capacity: 12 Sheets Round Die Also Available

Learn More

Table-mounted heavy-duty stapler with adjustable table for flat stapling or saddle-stitching up to 40 sheets of 20# paper (4" depth capacity).

Learn More

Learn More

Learn More

Learn More

Learn More

Learn More

The Finish @ Coil-M is a bigger and more feature-rich version of the popular Roll-@-Coil. Includes Crimping Pliers!

Learn More

Learn More

Electric, 12" wide punch with foot pedal, disengageable die pins, adjustable side stop & margin depth settings. A built-in comb spreader opens combs up to 2"
Punch capacity: 20 sheets

Learn More

The GBC MC12 WireBind manual finisher with universal handle makes finishing easy for all users in any setup or situation: at your desk, on a table or at a workstation. Adjustment knobs ensure spines close evenly for a polished look.

Learn More

For basic trimming only of paper stacks up to 1½" high - 12" wide opening with hand crank clamp and pull lever blade.

Learn More

With a 2-3/8\" capacity, this unit drills more than a ream of copier paper and features a traversing table with five stops for consistent hole positions on larger jobs. This drill uses style F drill bits.

Learn More

12-shelf storage cart with casters for easy movement. Rugged, heavy gauge, welded steel construction.

Learn More

Learn More

Medium-duty, electric, 14" wide punch activated with included foot pedal, disengageable die pins, adjustable side stop & margin depth settings. A built-in comb spreader opens combs up to 2".
Punch capacity: 20 sheets

Learn More

Manual numbering machine with 6 digits, adjustable pressure and side guides for consistent numbering position every time.

Learn More

The EBM-2.1 is a tabletop single-spindle drill with a 2" drilling capacity. Features an 'E-Z Glide' traversing table for easy multi-hole drilling.

Learn More

Easy-to-use electric coil crimper that cuts & crimps both sides of the coil at the same time.

Learn More

Medium-duty paper folder - up to 11¾" x 18" sheet size with fixed speed up to 10,300 sheets per hour. Ideal for mid-to-large mailrooms, copy shops, schools & churches.

Learn More

The Challenge HandyDrill is a tabletop single-spindle drill with a 2.5" drilling capacity. This machine is built to last and is the highest-quality single-spindle drill available.

Learn More

Manual, hand lever punching, with 4 modular dies for punching coil, comb & twin loop wire binding methods - all with one machine + an integrated comb spreader & wire closer.

Learn More

The GBC HeatSeal® H450 laminator makes your projects look great fast. Laminate items up to 13" wide - perfect for banners, certificates, and awards. Features settings for carrier-free or carrier operation.

Learn More

Table or stand-mounted heavy-duty staplers that can place two staples in one pass.

Learn More

Handles a 3-inch stack of sheets up to 17" x 22" in its laminated wooden tray and features adjustable speed control.

Learn More

The GBC PB2600 high capacity, electric CombBind® finisher binds up to 300 presentations per hour. Just set your spine size and get it done in three quick steps. Simply push the button or foot pedal to open the spine, load pages, and push the button again to close.

Learn More

For the quality-conscious consumer, this heavy-duty coil inserter is designed for every type of job - from low to high-volume production. Includes 12" Dual Powered Adjustable Rollers. All metal construction.

Learn More

Punching presentations is a snap with the MP2000W3. Ideal for offices, the MP2000W3 has disengageable pins and a vertical open throat making it easy to line up and punch in one step, even with special paper sizes.

Learn More

Punching presentations is a snap with the MP2000PB. Ideal for offices, the MP2000PB has disengageable pins and a vertical open throat making it easy to line up and punch in one step, even with special paper sizes.
Punch Capacity: 20 sheets

Learn More

Adjustable air-assisted jogger, accommodates a 4" pile height of sheets up to 13" x 19", 2 jogging speeds, foot pedal operated (included), rugged construction. Optional wheeled stand available separately.

Learn More

Punching presentations is a snap with the MP2000C4. Ideal for offices, the MP2000C4 has disengageable pins and a vertical open throat, making it easy to line up and punch in one step, even with special paper sizes.
Punch capacity: 14 sheets

Learn More

Easy slitting of your 8½" x 11" 10-up sheets - up to 375 cards per minute.

Learn More

Easy slitting of your 8½" x 11" 12-up sheets - up to 375 cards per minute.

Learn More

Electric motor-driven punching, includes 4 interchangeable dies for flexibility to produce coil, comb, and twin loop wire bound books - all with one machine + an integrated comb spreader & wire closer.

Learn More

• Provides both thermal lamination and mounting applications for a wide range of projects up to 12" wide, including signage, maps, POP displays and more

Learn More

Make an impression with your Color Coil® bound presentations. The GBC CC2700 dual-action roller system gets spines through punched sheets with reliable ease, and three adjustable spine-size settings ensure instant accuracy.

Learn More

16-7/8" manual cutter with 1-1/2" cutting height capacity. The 4305 is an all-purpose paper cutter in an economical and compact unit.

Learn More

The HD8370 Insert-A-Bind inserts and closes in one easy step, eliminating manual insertion of wire into documents.

Learn More

For frequent CombBind® users, the GBC C800pro delivers the capacity and durability you'll need. Adjustable pins punch any size document up to 12" wide. Punches up to 25 sheets and binds up to 425 sheets. Includes a foot pedal for fast, hands-free electric punch operation.
Punching capacity: 25 sheets

Learn More

Produce professional-looking business cards at up to 300 per minute, with or without bleeds! The built-in waste catcher stand maximizes run time with no-mess production. Quickly trims down 8½" x 11" sheets to standard 3½" x 2" business card size in just two fast passes! Uses a 10-up gutter-cut template.

Learn More

Powered coil crimper, adjustable from 3½" up to 14" binding edge length, foot pedal-operated at up to 50 cycles per minute.

Learn More

Heavy-duty stitcher - handles anywhere from 2 sheets to 1/4" thick documents; bump activated (flat) and foot pedal activated for both saddle and flat stitching.

Learn More

The FM-2 is a floor-model single-spindle drill with a 2" drilling capacity. It features a traversing table for easy multi-hole drilling.

Learn More

Makes quick & easy cutting of your 8½" x 11" 10-up sheets at speeds of up to 375 cards per minute. Your production times can be further reduced with the BCS 410's included scoring & perforation station!

Learn More

12-up version of the popular BCS410, quick & easy cutting of your 8½" x 11" 12-up sheets, speeds of up to 375 cards per minute. Your production times can be further reduced with the 412's included scoring & perforation station!

Learn More

The Challenge JF drill is a floor-model single-spindle drill with a 2" drilling capacity. This machine is built to last and is the highest-quality floor-model single-spindle drill available.

Learn More

Feature-packed, wide format, roll laminating machine - 40 inch width and board mounting capability at an affordable price point. The heated rollers allow for a smooth, clean finish. Maximum film thickness: 5 mil.

Learn More

Heavy-duty stitcher - Table flips to flat or 45 degrees for saddle stitching; bump activated (flat) and foot pedal activated for both saddle and flat stitching.

Learn More

Wire binding is faster and easier with this electric finisher. A dual load-and-crimp station eliminates the extra step of moving documents for loading. Just hang the spine, load the paper and close with the touch of a button.

Learn More

25" width, up to 3/16" mounting, commercial grade with speeds up to 5 feet/minute, dual adjustable temperature controls, and warms up in 8 minutes. Maximum film thickness: 10 mil.

Learn More

27" wide lamination, encapsulation and mounting, can accommodate boards up to 1/4" thick, also handles PSA adhesive films with handy rewind feature.

Learn More

Effortless wire insertion. The GBC CI12 electric finisher makes creating perfect Color Coil® presentations in record time simple. A unique, adjustable dual-roller system quickly threads Color Coil through punched documents. Built-in dual crimper cuts and crimps both ends in one step.

Learn More

Learn More